::DYNAPORE®::

POROUS METAL PRODUCTS


MKI's Dynapore® diffusion-bonded products comprise porous metals such as sintered wire mesh, multi-layer mesh laminates, powder metal, and non-woven fiber metal felt; as well as non-porous structures such as our Foil-Mesh™ materials, or custom laminates of metal foils with reticulated metal foams.

Dynapore® products are available as-produced in standard size sheets, or fabricated into cylinders, cones or other shapes with welded fittings, flanges, or connectors. For certain applications such as filtration or fluidization, standard formulations have been developed with specific uniform pore sizes or controlled permeability.

.: Filter Plate Laminates
  • Gas-solid and liquid-solid separation
  • 2µ-100µ standard filter ratings
  • 316L stainless steel standard
  • Hastelloy® C-22 and other alloys available
  • High strength, cleanable and backwashable
.: SC Premium Screen
  • Robust Design & Construction
  • Fixed Pore Geometry
  • Non-Compressible Media
  • 50 to 400µ Range
  • Available in SS316L, Alloy 20Cb-3
  • Custom Design, Materials, & Fabrication Capable
.: Fluidizing Media
  • Standard grades for most fluidizable powders
  • Uniform flow and controlled permeability
  • Cleanable, strong and abrasion resistant
  • Easily fabricated with sheet metal techniques
  • Available with particle barriers down to 2µ
.: Filter Discs
  • Zero fraying of edge wires
  • 0.5-200 micron standard filter ratings
  • 304L and 316L stainless steel standard
  • Diameters down to
    2.5 mm
  • Standard and high strength compositions
.: Filter Cartridges
  • 100% type 316L stainless steel
  • 2µ-100µ standard filter ratings
  • Standard 2" and 2½" diameters
  • Double open end or threaded NPT connectors
  • Cleanable and backwashable
.: Powder Metal
  • 0.5-40 micron standard filter ratings
  • Gravity-sintered for maximum permeability
  • 316L stainless steel standard
  • Hastelloy®, Monel, Inconel® and other alloys available
  • Available in standard size sheets
.: Fiber Metal
  • Sintered felt metal matrix
  • Homogeneous or graded density
  • High void volume and surface area
  • Available in 316L stainless steel
  • Graded density for filtration applications
.: Foil-Mesh™
  • Laminates of wire mesh and metal foils
  • Widely used as a bonding interface
  • Available with solid or etched foils down to .002"
  • 304L, 310, 316L, 904L stainless steels
  • Also used in heat pipes, flow fields, wicks
.: Microperforated Plate MPP™
  • Highly uniform square hole pattern
  • Thickness down to 0.002"
  • Pore size down to 25 microns
  • Replaces costly photo-etched foils
  • Open area ranging up to 60%
.: Custom Materials
  • MKI can meet target customer requirements
  • Control of pore size, permeability, strength and other properties
  • Composites of screens, powders, fibers et al.
  • Available in 316L SS or a variety of alloys
  • Finished components or sheet stock available


Martin Kurz & Co., Inc.

8439 Triad Drive • Greensboro, NC, USA 27409
Ph: 336-217-3814 • Fax: 336-668-4452
Email: